top of page
hub work_edited.jpg

All prices listed are for labor only, parts not included.

Service Menu

Below is a breakdown of the services we offer and what they cost. 

We work with the best bicycle tools and supplies availailable from brands like Unior, Park Tool, Nanuk, Enduro Bearings, Session Componets, Snap-On, Pedro's, Wera, Dumonde Tech, Muc-Off, Silca and more. No corners cut, no cheap, worn-out tools.  Your bikes are in excellent hands with us. Down In It Cycles, LLC is registered with the State of Colorado and fully insured. Down In It Cycles adheres to all manufacturer and industry standards.

alpine 1_edited.jpg

Basic Tune $50.00 *Mobile Service Available

If your bicycle has been sitting unridden for a while, or you just want to make sure everything is functioning well for an upcoming ride this is the tune up for you. The Basic Tune Up will cover the following.

  • Shifting adjustments

  • Brake Adjustments

  • Minor wheel truing and spoke tension inspection

  • Minor adjustments to hub, headset and bottom bracket bearings

  • Inspection of all nuts and bolts to be sure everything is safe

  • Tire safety inspection and inflation

  • Chain wipe down and lubrication

  • Wipe down and minor cleaning of the bicycle

  • recommendations for future work or parts if needed

  • 60 day Guarantee on all work

  • New component installation (chains, brake pads, tubes, shift levers, etc) is not included with the basic tune up. 

bleed green_edited_edited.jpg

Premium Tune-$140.00  with hydraulic brakes $100.00 with rim or cable disc brakes
*Mobile Service  Unavailable

The tune up for the discerning rider and our best value. Perfect for bikes that have seen a lot of hard or riding or before an event or race. This will leave your bike feeling like new.  The Premium Tune Up includes the following.

  • Thorough cleaning/detailing of the bicycle. Drivetrain components are cleaned in our Ultrasonic Cleaner

  • Shifting adjustments and hanger alignment

  • Brake adjustments including bleeding of hydraulic disc brakes if applicable.

  • Hydraulic brake pistons cleaned and lubricated for smooth operation.

  • Hub inspection/adjustment and freehub service with your choice of freehub oil or grease depending on noise level desired.

  • Thorough wheel truing and spoke tension inspection.

  • inspection of all nuts, bolts, brake rotors and suspension components to be sure everything is safe.

  • Adjustments as needed to headset, hubs and bottom bracket.

  • Chain lubrication with your choice of lube from Dumonde Tech, or Pedro's 

  • Tire inspection and sealant re fresh if tubeless (sealant not included)

  • Shock and fork air or coil spring adjustment to proper settings for rider weight

  • Inspection and adjustment of rebound and compression damping on fork and shock to suit rider weight and riding style.

  • If new cables, housing, chain, brake pads or cassette are needed there is no installation charge.  

  • Recommendations for future work or parts if needed.

  • A thorough documentation of all work done


Kids, Town, or Cruiser Bike Safety Check-$35.00 *Mobile Service Available

If you have some basic singlespeed kid's bikes, cruisers or town bikes this is a good place to start. We'll inspect the bikes, Air the tires, lube the chain and make sure everything is tight and safe to ride. If additional work or parts are needed, we'll let you know during the inspection. 


Complete Bicycle Overhaul

You have invested hard earned money on your bike, keep it performing the way it should with a Complete Bicycle Overhaul.

On a modern full suspension bike the overhaul ($325) includes a thorough strip down to the bare frame and cleaning of all components, fork lower service, shock air can service, brake bleed, adjustment and piston clean, derailleur adjustment and hanger alignment, thorough wheel truing and spoke tension inspection, tubeless sealant inspection and re fresh (sealant not included), complete bearing inspection (headset, bottom bracket, hub and linkage), overhaul and adjustment (if possible) and a nut, bolt and brake rotor inspection to be sure everything is safe.

Many modern sealed cartridge type bearings are non adjustable. Sometimes the seals can be carefully removed and the bearings re greased but not always. These types of bearings generally are just removed and replaced. We will inspect all these bearings when you drop off your bike and will add new bearings to the estimate if needed. There is no additional charge to install new bearings, just the cost of the parts.

     Hardtail mountain bikes with a front fork only will get a reduced price ($260) and bikes with no suspension will get get an even greater reduced price ($190).

Dropper posts are a whole other animal. We will inspect them and add air or replace cables if needed but getting inside and rebuilding them is not included in the overhaul. We offer this as a separate service on most popular dropper posts. 60 day guarantee on all work.

hanger genie_edited_edited.jpg

Indvidual Service Items
*Mobile Service Available On Most 

Does your  bike need a small repair or tune? Maybe a flat tire repaired, a brake bled, a bicycle purchased online assembled or a suspension component serviced? If our tune up services aren't what you are looking for we also offer the following services.

All prices listed are for labor only, parts not included. 


  • Wheels and Tires

  • Flat repair-new tube Installation (most bikes)-$10

  • Tubeless tire install rim already taped-$15

  • Tubeless set up with tape, valve stem and tire install-$25 *parts not included

  • Tubeless tire repair with plugs-$15

  • Minor wheel true, tire stays on-$25.00

  • Standard wheel true, tire comes off-$40

  •  Replace broken spokes (up to five)/wheel true-$50

  • Wheel Build-$85 per wheel

  • Replace cartridge style hub bearings (Industry Nine, Hope, Project 321, DT, etc.-$45

  • Freehub body service-$25 

  • Install new freehub body-$30

  • Overhaul front or rear hub traditional loose ball-$25

  • Hub Adjustment Traditional loose ball-$12

  • Install cassette-$5.00

  • Remove cassette-$5.00

  • Tire insert install (Cush Core, etc)-$30.00 per wheel

  • Derailleurs and Shifting

  • Derailleur adjustment-$15

  • Derailleur hanger alignment-$25

  • New derailleur installation-$40

  • Shift lever install mtb style-$35

  • Shift/brake lever install drop bars -$60

  • Derailleur cable install Internal-$25.00

  • Derailleur cable Install external-$15

  • Chain installation-$10.00

  • Internal style hub shifting adjustment-$25

  • Brakes

  • Rim brake adjustment-$15

  • Rim brake pad install-$20

  • Disc brake adjustment (rubbing, loose caliper, etc)-$15.00

  • Hydraulic Brake Bleed-$30.00 per brake (this includes the fluid, isopropyl alcohol and other shop supplies used)

  • Disc brake pad install-$10.00

  • Disc rotor Install-$10.00

  • Disc rotor true-$10.00

  • Hydraulic disc brake Installation Internal-$45 External-$35

  • Brake cable Installation-$15

  • Handlebar/Stem Services

  • Mountain type handlebar installation-$25.00

  • Road/drop bar installation-$65.00

  • Stem installation-$15

  • Grip installation-$3.00

  • Cut handlebar-$15

  • Handlebar tape install-$25

  • Other Services

  • Assemble Bicycle from box- $80-$175

  • Assemble E Bike purchased online-$160.00

  • Assemble bicycle from bare frame-$280

  • Rock Shox Reverb bleed-$225.00 This is about the cost of a new cable actuated dropper post and lever. Seriously, just replace the soggy, droopy Reverb and be done with it. 

  • Dropper post installation $35 internal $30 external

  • Dropper post cable installation-$20 internal $15 external

  • Dropper lever installation-$25 internal $20 external

  • Suspension Services *Mobile Service Unavailable

  • Fork Lower Service-$45 *Labor only, does not include seals or oil

  • Rear shock air can service-$45 *Labor only, does not include seals or oil

  • Fork or shock damper service/rebuild-$185-$325 depending on parts needed.

  • Rear suspension linkage overhaul/bearing replacement-$145 (most bikes) *does not include bearings


  • Fork and Headset Services

  • Fork installation with steer tube cut-$40

  • Headset Installation-$35

  • Crown race removal-$10

  • Crown race Installation-$10

  • Cut steer tube only-$25

  • Star nut Installation-$5

  • Headset overhaul-$30

  • Crank, Pedal and Bottom Bracket Services

  • Crankset Installation-$35

  • Bottom Bracket Installation Press fit or threaded-$30

  • Chainring Installation-$25

  • Bottom Bracket overhaul-$30

  • Bottom Bracket removal-$15

  • Chase Threaded Bottom Bracket Shell-$35

  • Chase Threads in 9/16 or 1/2 inch crankarm-$15

  • Pedal Installation-$3

  • Pedal removal-$3

  • Clipless pedal cleat Installation-$10

  • Pedal overhaul-$35

bottom of page